• 4-solution-architecture.jpg
  • binhan3-1-2.jpg
  • bms.gif
  • b_850x567_vp_oji-fuji_bm2.jpg
  • desigo.png
  • Figure-1-System-Architecture-of-the-proposed-Ubiquitous-Smart-Home.png
  • giay.jpg
  • jenesys-product-suite.jpg
  • nnabms.JPG
  • openpmc_en_z.jpg
  • plc-panel.jpg
  • plc.jpg
  • QSPEC-SOLUTIONS-Control-Room.png
  • scada.jpg
  • siemens-dcs-system-1496134223-3022430.jpeg
  • wincc.jpg

Clipsal Lighting system

Simple, cost effective and fully programmable

C-Bus is a microprocessor-based control and management system for Buildings and Homes.  It is used to control lighting and other electrical services such as pumps, Audio Visual Devices, Motors, etc. Whether simple ON/OFF control of a lighting circuit, or variable (analogue) type control, such as electronic dimmable fluorescent ballasts, C-Bus can be used to easily control virtually any type of electrical load.



   To ensure fast and reliable operation, each C-Bus device has its own in-built microprocessor and “intelligence”, allowing units to be individually programmed.

C-Bus uses a patented method for updating the status of units.  This method does not require a central computer or central controller to handle databases or lookup tables to operate.  The status of each C-Bus unit is initiated at specific time intervals, without the need of a central controller.  Each device is allocated a specific time frame to broadcast its status, synchronised by a self-generated system clock pulse.  This allows large amounts of data to be transmitted in a very small time frame, effectively and reliably on the network, leading to low processing overheads and low bandwidth requirements.





Clipsal  C-bus2 in Microsoft factory

 - all lighting system used clipsal c-bus 2

-  Production and office area used Dali( dimmer) lighting to saving energy 

- installed more sensor to make high performance and to make lighting operate in automatic mode

- connect to BMS system it help for control lighting system from Control center very easy 

          C-bus schematic

       free relay control panel


        Dim ( Dali c-bus)

                   BMS control

With the c-bus system. it make for lighting system become realize in operation, saving energy by use dim light,use sensor and lighting on/off by schedule at some area no need lighting or some area on at working time and auto off after working time...... with the integrate to BMS , easy to control from control center , other more very easy to maintenance ,replace and change any time any where....

To more then information. please contact to us or go to clipsal website Here

Clipsal cbus for home,apartment...



-Reduce time to install

-Reduce the marterial

Philips HF-R TD 2 26-42 PLC/T Touch and DALI


wall switch 

Hình ảnh có liên quan

Dali gateway

Kết quả hình ảnh cho clipsal  lux level sensor


Kết quả hình ảnh cho cbus ir remote



- Easy to use : the wall switch go with LED , so that very easy at dark area, also we supply for this system a remote , so that the system very safe and easy when use at night

- Saving power. the system use dim lighting so that the user can increase or decrease lighting level ,also we install some sensor support for automatic mode

-Free for update. Clipsal also supply the homeautomation system( Wiser system) on C-bus base. so that this system very easy to upgrade in the future

- Easy to repair and changing 



 click here: Tài liệu về C-bus for documents about c-bus

 C-bus system : Trang chủ của Clipsal c-bus


  • 1200px-ABB_logo.svg.png
  • 4248.jpg
  • 18569-21917-4.jpg
  • Clipsal-600x285.png
  • download.jpg
  • honeywell-logo-11.jpg
  • logo.png
  • omron.jpg
  • schneider-electric-logo.gif
  • tridium_logo_RGB.png

Please publish modules in offcanvas position.